Car On-board diagnostic system

Program Nissan Rogue 2010 Key without PIN code

Publié le 9/02/2018 à 09:16, Marne-la-Vallée
Mots clefs : Lonsdor K518Londsor K518ISELonsdor K518 key programmer
Lonsdor K518ISE key programmer was used to program immobilizer key for a Nissan Rogue year 2010, I found extra menu and a few new options, BCM to pin was done automatically.  No need to pic converter, no token, easy instructions. More options for smart key then other programmers.
Connect K518ISE host with vehicle via OBD diagnostic socket
Select Immobilizer->Nissan->Select from type->Immobilizer->Electronic Key (E0)->Add key
Insert working key to turn ignition on
Lonsdor K518ISE automatically read BCM code and PIN
Insert new key and turn ignition on
Turn ignition off
Repeat IGN ON/OFF for twice
Program success.
Follow Lonsdor K518 prompt to program next key. Very easy.
I also added smart key on an imported Nissan and other models, no need for hazard light to be on.. Over all experience with Nissan was good.

Page précédente | Page 1 sur 107 | Page suivante

Mes albums

Où suis-je actuellement ?


Mes amis

Sites favoris