Car On-board diagnostic system

How to make ODIS 4.23 work with VAS6154 clone

Publié le 2/01/2018 à 09:43, Paris - Charles-de-Gaulle
Mots clefs : vas 5054avas 6154vas5054aODIS 4.23vas6154
Guide: How to install ODIS software with VAS 6154 diagnostic interface. VAS6154 China clone is the improved version of VXDIAG VCX NANO (all made by Allscanner company). VAS6154 supports connection via USB and WiFi. Connection via WiFi is more stable than that via Bluetooth
 
VAS 6154 interface comes with best firmware and quality blue board.
vas-6154-wifi
 
VAS 6154 only works with ODIS 3.0.3 or newer. Cannot support VAS-PC V19
ps. VAS 5054A vs. VAS6154
VAS 5054A can work with odis new or old
VAS5054a support USB and Bluetooth connection
Stable only with Oki Chip and Bluetooth Chip AMB2300
Vas6154 supports USB and WiFi connection
 
 

How to Install Odis with China Clone Vas 6154?

1. Format c:\
2. Install Win 7 (64)
3. Install ALL DRIVER !!!
4. Defender + Firewall and all Virus Prog. OFF
5. Use 3.0.3 or above Odis 4.23 latest version (software CD or download from other resources
6. Install as admin
install-odis-with-vas-6154-1
7.
8.Install Offboard Diagnostic Information System Service Setup
install-odis-with-vas-6154-2
 
install-odis-with-vas-6154-3
 
install-odis-with-vas-6154-4
 
install-odis-with-vas-6154-5
 
install-odis-with-vas-6154-6
 
COPY and PASTE license.dat
install-odis-with-vas-6154-7
 
install-odis-with-vas-6154-8
 
install-odis-with-vas-6154-9
 
install-odis-with-vas-6154-10
 
install-odis-with-vas-6154-11
 
install-odis-with-vas-6154-12
 
install-odis-with-vas-6154-13
 
COPY + PASTE Launcher Crack overwrite
install-odis-with-vas-6154-14
install-odis-with-vas-6154-16
install-odis-with-vas-6154-17
 
 
 
 
Send Hardware Id to engineer to activate the software with registration key
install-odis-with-vas-6154-18
 
install-odis-with-vas-6154-19
 
install-odis-with-vas-6154-20
 
install-odis-with-vas-6154-21
 
install-odis-with-vas-6154-22
 
install-odis-with-vas-6154-23
 
Download VX Maneger Latest Version
http://www.allscanner.com/?page_id=10003&lang=en
install-odis-with-vas-6154-24
 
install-odis-with-vas-6154-25
 
install-odis-with-vas-6154-26
 
install-odis-with-vas-6154-27
 
install-odis-with-vas-6154-28
 
Connect via USB
install-odis-with-vas-6154-29
 
install-odis-with-vas-6154-30
 
install-odis-with-vas-6154-31
 
Connect to Internet !!! Click
install-odis-with-vas-6154-32
 
install-odis-with-vas-6154-33
 
install-odis-with-vas-6154-34
 
install-odis-with-vas-6154-35
 
install-odis-with-vas-6154-36
 
Connect VAS 6154 ODIS with WIFI !!!
install-odis-with-vas-6154-37
 
install-odis-with-vas-6154-38
 
install-odis-with-vas-6154-39
 
install-odis-with-vas-6154-40
 
Credit to pilic from MH forum.
 

How to set up Scania SDP3 2.31 without activation

Publié le 28/12/2017 à 11:27, Paris
Mots clefs : Scania SDP3 2.31Scania SDP3Scania VCI2Scania VCI3
Scania SDP3 2.23.1 truck diagnostic and programming software crack for VDI2 VCI3 free download and installation on Windows 7 64-bit system step-by-step. No USB dongle, without activation.
 
 
 
Software Version: V2.31.1
scania-sdp3-2.31
Operating System: Windows 7 64 bit
Software language: German, English,Spanish, Finnish, French, Italian,Japanese, Korean, Dutch, Polish, Arabic, Portuguese, Russian, Swedish,Turkish, Chinese, Traditional Chinese,Romanian
Compatible device: Scania VCI2Scania VCI3 truck diagnostic tools.
 
If you need newer SDP3 2.33, please check here
 

How to install Scania SDP3 2.31 software?

Preparation:
Please set date/time to March, 2017 (i.e 27/03/2017) on Windows 7 64-bit PC/computer.
 
Step 1: Install Adobe Reader
Open SDP3 2.31 software CD
Open AdbeRdr920_en_US
install-scania-sdp3-231-1

Install Adobe Reader 9.2
install-scania-sdp3-231-2

Click Next
Click Install
install-scania-sdp3-231-3

Adobe Reader setup completed. Click on Finish
 
Step 2: Install Microsoft.NET 2015
Open NDP462-KB3151800-x86-x64-AIIOS-ENU and install Microsoft.NET 2015
install-scania-sdp3-231-4

Accept license terms. Click on Install
install-scania-sdp3-231-5

Installation is complete.
Click on Finish
 
Step 3: Install Scania SDP3 2.31 Setup
Open Scania Daignosis & Programmer 3 2.31 setup
install-scania-sdp3-231-6

Install Scania SDP3 2.31 setup
install-scania-sdp3-231-7

Click on Next
Accept license agreement
install-scania-sdp3-231-8

Choose destination folder C:/Program Files (x86)/Scania/SDP3
Click Install
Make sure that the VCI unit and the SDP3 USB key are disconnected from the computer before continuing with this installation.
install-scania-sdp3-231-9

Complete the SDP3 2.31 setup.
Click on Finish
 
Step 4: Turn off User Account Control
First copy sdp3 patch 2.31 folder from software CD to desktop
install-scania-sdp3-231-10
 
Right click the mouse->Personalize->Control Panel->User Accounts and Family Safety-> User Accounts->Change User Account settings
install-scania-sdp3-231-11

Select Never notify and press OK
Open sdp3 patch 2.31 folder on desktop
install-scania-sdp3-231-12

Run tmode as Administrator
Restart computer to turn off User Account Control
 
Step 5: Install SDP3 driver
Open patch folder
Open drivers folder
install-scania-sdp3-231-13
 
install-scania-sdp3-231-14

Run install_divers as Administrator
install-scania-sdp3-231-15

Run install as Administrator
install-scania-sdp3-231-16

Select Install this driver software
install-scania-sdp3-231-17

Driver installed successfully.
 
Step 6: Run SDP3 & Change Language 
Open patch folder->FIX SDP3 2.31 folder
copy these 2 files SCOMM_SSK.dat and SCOMM_SSK_HL.dll and replace them on C:/Program Files (x86)/Scania/SDP3
install-scania-sdp3-231-18
 
install-scania-sdp3-231-19
 
Open SDP3 software on desktop
Accept warning and Adobe Reader licences agreement
install-scania-sdp3-231-20

Select Connection tab-> Connect to wireless VCI
Exit SDP3
Open SDP3 Configurator
install-scania-sdp3-231-21

Select language
Then run Scania SDP3 software again, language is set to you desired.

How to set up Nexiq Clone to work with John Deere SA

Publié le 27/12/2017 à 12:06, Aéroport de Paris - Roissy Charles-de-Gaulle
Mots clefs : NexiqNexiq USB LinkJohn Deere SAJohn Deere Service Advisor

Hi, I have two scanner, John Deere EDL v2 and Nexiq usb link. EDL connection with service advisor is perfect. But with usb link, it doesn’t work. The only way where i have connection with usb link is in GetEcuId.

 

But finally I got Nexiq usb link to work with Service Advisor software

Here is how to operate…

 

First, you must reflash your Nexiq with John Deere EDL firmware. When you do that, you\ll got EDL as connected device in device manager.

 

Find original firmware and save it (backup)
C:\NEXIQ\RP1210A\usblink.bin
In John Deere Service Advisor find EDL.bin
I do not remember where it location …
Copy and rename EDL.bin to usblink.bin
replace original C:\NEXIQ\RP1210A\usblink.bin
Go to C:\NEXIQ\Test
open binload.exe
check checkbox – Enable automatic USB-Link firmware update
open CommCheck.exe
firmware will be update
and Nexiq name will be changed – now EDL-Link

 

Please take a note, that firmware reflash is possible only with original nexiq or HQ nexiq clone, LQ clones can’t be reflashed, even with newer nexiq firmware

It depends on what clone you have, my clone get all updates,works with OBD volvo,and have no issue.

 

Second, you must modify standard Nexiq 9 pin deutsch cable. just simply revert positions of CAN lines. There is two pairs of CAN lines. Here is instruction and picture how to do that here

 

Standard Nexiq 9 pin Deutsch cable

nexiq-9pin-cable

nexiq-9pin

Nexiq 9 pin Deutsch cable pinout

nexiq-9pin-adapter

Regards!

http://blog.obdii365.com/2017/12/27/use-nexiq-with-john-deere-service-advisor/


How to install Porsche Multifunction steering adapter

Publié le 26/12/2017 à 09:32, MONTMARTE
Mots clefs : Porsche steering kit

Some customer has bought our Porsche Multi-functional Steering Wheel Upgrade STMV1 Steering Master Adapter but have no idea how to install it. Here’s the step-by-step installation guide provided.

 

Installation instruction

17/Nov/2017 V1.9

STMV1-971 Steering Master Adapter(971 Steering Wheel)

Support Model: Panamera – 971

STMV1 Steering Master

Without heating support

install-porsche-steering-master-1

Support Model:

Panamera (2010-2016) Cayenne (2011-2015)
Carrera-911 (2009-2016) Cayman (2009-2016)
Boxster (2009-2016)

STMV1-H steering master

With heating support

install-porsche-steering-master-2

Multifunction retrofit kit Models Support :
Panamera (2010-2016)
Cayenne (2011-2015)
Carrera-911 (2009-2016)
Cayman (2009-2016)
Boxster (2009-2016)

 

Steering_Master_Installation_Guide-EN.pdf

Adapter works mechanism diagram

install-porsche-steering-master-3

Adapter works mechanism

Adapter convert LIN BUS protocol and buttons backlight signal, heating function to fit original steering wheel control module.

install-porsche-steering-master-4

Connection diagram(STMV1)

Connection diagram of STMV1 adapter without heating support

install-porsche-steering-master-5

Remove airbag

Remove steering wheel

Tools:

1# T25 Torx

2# Slotted screwdriver

 

3# M12 XZN/Triple Square bits socket

4#Torque Wrench

install-porsche-steering-master-6M12 XZN

(1) Remove airbag

  • Disconnect
  • Insert T25 torx to #2 hole until you can feel the spring, and then gently pull the airbag unit outward.

install-porsche-steering-master-7

(2) Remove connector

2.1 Remove airbag connector, orange plastic tabs(1) need to be popped up first.

install-porsche-steering-master-8

(3) Remove airbag

3.1 Remove airbag form steering wheel

install-porsche-steering-master-9

(4) Remove connector

4.1 Remove clock spring connector(2) and heating connector(1)

install-porsche-steering-master-10

(5) Unscrew the bolts

5.1 Unscrew the (1)bolts use M12 XZN/ Triple Square bits socket with torque wrench

install-porsche-steering-master-11

 

Install steering master adapter

Tools:

1# 1.5mm Slotted screwdriver 2# T20 Torx

3# M12 XZN

 

(1) Remove mounting plate

  • Unscrew airbag mounting plate 3 fixed bolts by T20

install-porsche-steering-master-12

(2) Remove mounting plate

  • Remove airbag mounting

install-porsche-steering-master-13

(3) Connector pinout

  • Clock spring connector

install-porsche-steering-master-14

(4) Remove connector lock

install-porsche-steering-master-15

(5) Reassemble the plug

  • Insert adapter harness PINs to position #11&12 of plug

install-porsche-steering-master-16

(6) Reassemble the plug

  • Insert wire harness PIN to #11&12

install-porsche-steering-master-17

(7) Wire harness path

  • wire harness route path,fixed

install-porsche-steering-master-18

(8) Adapter connect instruction

  • Remove original #3 plug housing, connect it to #2 socket source from
  • Connect #3 plug to original steering wheel electronic
  • Connect #1

install-porsche-steering-master-19

(9) Adapter fixed position

  • Insert adapter to top space of electronic box and fixed

install-porsche-steering-master-20

(10) Adapter fixed

  • Cover adapter and connector with

install-porsche-steering-master-21

(11) Fixed steering wheel and airbag

  • Reassemble airbag holding plate, remember pull 2 shift paddles plug out of airbag holding plate, reconnect all plugs after fixed

 

Install adapter with heating support(STMV1-H)

STMV1-H support steering wheel heating, this module have an extra socket to connect heating temperature and switch plug.

Heating switch of new steering wheel need remove and replace resistor(Step.15).

install-porsche-steering-master-22

(11) Remove back cover

  • Remove new wheel back cover

install-porsche-steering-master-23

(12) Remove heat switch cover

  • Remove heat switch cover

install-porsche-steering-master-24

(13) Remove heat switch

  • Remove heat switch cover

install-porsche-steering-master-25

(14) Remove heat switch

12.1 Remove heat switch cover

install-porsche-steering-master-27

(15) Modify heat switch resistor (important)

  • Remove 8.22K resistance, keep it empty
  • Replace 22.2K resistance with 390 ohm, new 390 ohm resistance supply with adapter package.

install-porsche-steering-master-26

After

Soldering temperature 330-350C°

install-porsche-steering-master-28

(16) Adapter heat support socket connection guide

Remove original heating temperature sensor and switch plug form electronic box in steering wheel, connect this plug to STMV1-H adapter heating support socket.

Adapter insert setting the top of electronics box in Wheel like this photo,Insert top side of adapter into gap first.

install-porsche-steering-master-29

(17) Reassemble heat switch cover

  • Reassemble heat switch cover

install-porsche-steering-master-30

(18) Reassemble back cover

  • Reassemble new wheel back cover

install-porsche-steering-master-31

(19) Cover adapter with tape

Cover adapter and connector with tape, it’s supplied with adapter kits

install-porsche-steering-master-32

How to remove new airbag

Insert T25 torx to one side hole until you can feel the spring, and then gently pull the torx side airbag unit outward, other side same process.

install-porsche-steering-master-33

FAQ

 

(a) How to upgrade steering wheel with heating?

Steering column control module need active heating function, install heating supported spring clock, steering wheel need support heating also.Heating support adapter kits parts number is STMV1-H

http://porschepiwistester2.blogspot.com/2017/12/update-porsche-sport-design-steering-wheel-to-multi-function.html

Original with sport style steering wheel upgrade multifunction steering wheel, need coding the vehicle steering control module from sport style wheel to multifunction, input“Multifunction enable code” and coding the car by PIWIS. Following this coding guide

 

  • 1 Upgrade to new steering wheel

Adapter fit Carrera 997.1 need upgrade the steering column module to 997.2(997.613.289.01 or 997.613.289.00) .997.1 upgrade steering control module reference http://porschepiwistester2.blogspot.com/2017/12/how-to-code-porsche-9971-steering-wheel.html

 

  • Steering wheel airbag upgrade safety

New and original steering wheel airbag connect to control module through clock spring connector PIN#3 #4 #5 #6, it’s independent system, we haven’t made any changes to it.The most important thing is buy genuine airbag of Porsche.

 

http://blog.obdii365.com/2017/12/26/install-porsche-multifunction-steering-wheel-adapter/


How to add Cummins Inline5 to INSITE 8.2.0 software

Publié le 22/12/2017 à 08:38, Aéroport de Paris - Roissy Charles-de-Gaulle
Mots clefs : Cummins Iniste 8.2.0Cummins Insite 8.2.0.184Cummins Inline 5Cummins Inline 6

Here’s the instruction on adding Cummins Inline 5 data link truck diagnostic adapter to INSITE 8.2.0 software.

 

 

Preparation:

First you need to close all anti-virus software program

Then install Cummins 8.2.0 pro/lite version software

How to Install Activate Cummins Insite 8.2.0.184 Pro and Lite

 

Step 1: Install Inline 5 driver 

 

Check your operating system, here we set it up on Windows 7 32-bit

use-inline5-with-insite-820-1

Open software CD

Open INSITE.7_6_2.rar-> Software folder->INSITE 5 Drivers

use-inline5-with-insite-820-2

use-inline5-with-insite-820-3

Copy Inline 5.7.0.1 Setup- 32 Bit.exe to desktop

If you use 64-bit system, you copy Inline 5.7.0.1 Setup- 64 Bit.exe to desktop

use-inline5-with-insite-820-4

Install the adapter driver, here we use Cummins Inline5 data link (you can use Inline 6, nexiq or other adapters as well)

Run Inline 5.7.0.1 Setup-32 Bit on desktop as administrator 

use-inline5-with-insite-820-5

Click on NEXT

use-inline5-with-insite-820-6

Accept the windows security warning to install driver software

use-inline5-with-insite-820-7

Tick “Launch Inline 4/5 Reflash Tool” and click on Finish

Delete Inline 5.7.0.1 Setup-32 Bit on desktop

Device driver has been successfully installed

use-inline5-with-insite-820-8

use-inline5-with-insite-820-9

Open Computer->Manager->Device Manager->Universal Serial Bus Controller to check device is well connected

use-inline5-with-insite-820-10

Step 2: Add Inline5 adapter to INSITE 8.2.0

 

Open INSITE 8.2.0.184 pro or lite version software on desktop

use-inline5-with-insite-820-11

Select Add New option on the middle of the bottom tool bar

use-inline5-with-insite-820-12

Click Next to install ECU Connection Wizard

use-inline5-with-insite-820-13

Select RP1210 adapters, click on Next

use-inline5-with-insite-820-14

Select Vendor, Adapter INLINR 5 USB and protocol Auto detect, click on Next

use-inline5-with-insite-820-15

Click on Next

use-inline5-with-insite-820-16

Tick both 2 options and click Finish

Again software will prompt to install ECU connection wizard, click next

Do the same setting as above, but this time we choose protocol J1708

use-inline5-with-insite-820-17

Click Finish

Do the setting again, this time we add protocol J1939

use-inline5-with-insite-820-18

Click Finish and cancel ECU connection wizard interface

use-inline5-with-insite-820-19

Please add the corresponding adapter in the iniste software

use-inline5-with-insite-820-20

Select INLINES USB (Auto Detect) Connection on the middle of bottom tool bar

use-inline5-with-insite-820-21

Click Connect button to connect to ECM

Now you can using the software, read fault code, manage data logger, do calibration etc

use-inline5-with-insite-820-22

use-inline5-with-insite-820-23

use-inline5-with-insite-820-24

www.obdii365.com

http://blog.obdii365.com/2017/12/21/use-cummins-insite-8-2-0-184-with-inline5-data-link/



Page précédente | Page 2 sur 20 | Page suivante

Mes albums

Où suis-je actuellement ?



Rubriques

Mes amis

Sites favoris