Car On-board diagnostic system

Volvo VIDA 2014D Login Blank Page Error Solution

Publié le 11/01/2018 à 08:37, Paris - Charles-de-Gaulle
Mots clefs : Volvo VIDA 2014DVolvo VIDAVolvo VIDA DiCE
Free download VIDA 2014D patch when you fail to log in.
 
Volvo VIDA Dice 2014D cannot log in:
When the user name is entered, the interface will pop up “please wait” and jump into a blank page for seconds, then back to the login interface.
volvo-vida-2014d-fail-login-1

 

volvo-vida-2014d-fail-login-2

 

volvo-vida-2014d-fail-login-3

 

volvo-vida-2014d-fail-login-4

If your computer date/time is newer than 31/12/2018 and you fails to login VIDA All-in-one, please download patch here:

 
 
 
 
 
Run Patch.cmd and Vida 2014D works like a charm
volvo-vida-failed-login-solution
 
Note: this patch only works for VIDA 2014D; cannot be used for VIDA 2014A
 
Tech support from obdii365.com
http://vidadice.blogspot.com/2018/01/volvo-vida-dice-2014d-failed-to-login.html

How to Program Jaguar XJ Smart Key with Lonsdor K518

Publié le 5/01/2018 à 09:06, Aéroport de Paris - Roissy Charles-de-Gaulle
Mots clefs : Lonsdor K518Lonsdor K518ISELonsdor K518 key programmer
Lonsdor K518ISE key programmer has successfully programmed a smart key on a Jaguar XJ. Pictures and procedures attached below.
 
Guide:
Connect K518 host with vehicle via OBD socket
Turn ignition on
Select Immobilizer->Jaguar->XJ->Smart key->Add smart key
lonsdor-k518ise-jaguar-xj-1
 
lonsdor-k518ise-jaguar-xj-2
 
lonsdor-k518ise-jaguar-xj-3
 
lonsdor-k518ise-jaguar-xj-4

communicating
Turn ignition off
Lonsdor K518 Read vehicle VIN,part number,software version
lonsdor-k518ise-jaguar-xj-5
lonsdor-k518ise-jaguar-xj-6
lonsdor-k518ise-jaguar-xj-7
 
 
 
Identify number of keys programmed in car:2
lonsdor-k518ise-jaguar-xj-8

Press OK to program a new smart key
lonsdor-k518ise-jaguar-xj-9

Keep the smart key to be programmed in hand
lonsdor-k518ise-jaguar-xj-10

Programming, press the Unlock button of the smart key once within 5 sec
lonsdor-k518ise-jaguar-xj-11
 
lonsdor-k518ise-jaguar-xj-12
 
A new smart key has been programmed
lonsdor-k518ise-jaguar-xj-13
 
Programming completed
lonsdor-k518ise-jaguar-xj-14
 
Test the new smart key
lonsdor-k518ise-jaguar-xj-15
 
Success!!!

How to make ODIS 4.23 work with VAS6154 clone

Publié le 2/01/2018 à 09:43, Paris - Charles-de-Gaulle
Mots clefs : vas 5054avas 6154vas5054aODIS 4.23vas6154
Guide: How to install ODIS software with VAS 6154 diagnostic interface. VAS6154 China clone is the improved version of VXDIAG VCX NANO (all made by Allscanner company). VAS6154 supports connection via USB and WiFi. Connection via WiFi is more stable than that via Bluetooth
 
VAS 6154 interface comes with best firmware and quality blue board.
vas-6154-wifi
 
VAS 6154 only works with ODIS 3.0.3 or newer. Cannot support VAS-PC V19
ps. VAS 5054A vs. VAS6154
VAS 5054A can work with odis new or old
VAS5054a support USB and Bluetooth connection
Stable only with Oki Chip and Bluetooth Chip AMB2300
Vas6154 supports USB and WiFi connection
 
 

How to Install Odis with China Clone Vas 6154?

1. Format c:\
2. Install Win 7 (64)
3. Install ALL DRIVER !!!
4. Defender + Firewall and all Virus Prog. OFF
5. Use 3.0.3 or above Odis 4.23 latest version (software CD or download from other resources
6. Install as admin
install-odis-with-vas-6154-1
7.
8.Install Offboard Diagnostic Information System Service Setup
install-odis-with-vas-6154-2
 
install-odis-with-vas-6154-3
 
install-odis-with-vas-6154-4
 
install-odis-with-vas-6154-5
 
install-odis-with-vas-6154-6
 
COPY and PASTE license.dat
install-odis-with-vas-6154-7
 
install-odis-with-vas-6154-8
 
install-odis-with-vas-6154-9
 
install-odis-with-vas-6154-10
 
install-odis-with-vas-6154-11
 
install-odis-with-vas-6154-12
 
install-odis-with-vas-6154-13
 
COPY + PASTE Launcher Crack overwrite
install-odis-with-vas-6154-14
install-odis-with-vas-6154-16
install-odis-with-vas-6154-17
 
 
 
 
Send Hardware Id to engineer to activate the software with registration key
install-odis-with-vas-6154-18
 
install-odis-with-vas-6154-19
 
install-odis-with-vas-6154-20
 
install-odis-with-vas-6154-21
 
install-odis-with-vas-6154-22
 
install-odis-with-vas-6154-23
 
Download VX Maneger Latest Version
http://www.allscanner.com/?page_id=10003&lang=en
install-odis-with-vas-6154-24
 
install-odis-with-vas-6154-25
 
install-odis-with-vas-6154-26
 
install-odis-with-vas-6154-27
 
install-odis-with-vas-6154-28
 
Connect via USB
install-odis-with-vas-6154-29
 
install-odis-with-vas-6154-30
 
install-odis-with-vas-6154-31
 
Connect to Internet !!! Click
install-odis-with-vas-6154-32
 
install-odis-with-vas-6154-33
 
install-odis-with-vas-6154-34
 
install-odis-with-vas-6154-35
 
install-odis-with-vas-6154-36
 
Connect VAS 6154 ODIS with WIFI !!!
install-odis-with-vas-6154-37
 
install-odis-with-vas-6154-38
 
install-odis-with-vas-6154-39
 
install-odis-with-vas-6154-40
 
Credit to pilic from MH forum.
 

How to set up Scania SDP3 2.31 without activation

Publié le 28/12/2017 à 11:27, Paris
Mots clefs : Scania SDP3 2.31Scania SDP3Scania VCI2Scania VCI3
Scania SDP3 2.23.1 truck diagnostic and programming software crack for VDI2 VCI3 free download and installation on Windows 7 64-bit system step-by-step. No USB dongle, without activation.
 
 
 
Software Version: V2.31.1
scania-sdp3-2.31
Operating System: Windows 7 64 bit
Software language: German, English,Spanish, Finnish, French, Italian,Japanese, Korean, Dutch, Polish, Arabic, Portuguese, Russian, Swedish,Turkish, Chinese, Traditional Chinese,Romanian
Compatible device: Scania VCI2Scania VCI3 truck diagnostic tools.
 
If you need newer SDP3 2.33, please check here
 

How to install Scania SDP3 2.31 software?

Preparation:
Please set date/time to March, 2017 (i.e 27/03/2017) on Windows 7 64-bit PC/computer.
 
Step 1: Install Adobe Reader
Open SDP3 2.31 software CD
Open AdbeRdr920_en_US
install-scania-sdp3-231-1

Install Adobe Reader 9.2
install-scania-sdp3-231-2

Click Next
Click Install
install-scania-sdp3-231-3

Adobe Reader setup completed. Click on Finish
 
Step 2: Install Microsoft.NET 2015
Open NDP462-KB3151800-x86-x64-AIIOS-ENU and install Microsoft.NET 2015
install-scania-sdp3-231-4

Accept license terms. Click on Install
install-scania-sdp3-231-5

Installation is complete.
Click on Finish
 
Step 3: Install Scania SDP3 2.31 Setup
Open Scania Daignosis & Programmer 3 2.31 setup
install-scania-sdp3-231-6

Install Scania SDP3 2.31 setup
install-scania-sdp3-231-7

Click on Next
Accept license agreement
install-scania-sdp3-231-8

Choose destination folder C:/Program Files (x86)/Scania/SDP3
Click Install
Make sure that the VCI unit and the SDP3 USB key are disconnected from the computer before continuing with this installation.
install-scania-sdp3-231-9

Complete the SDP3 2.31 setup.
Click on Finish
 
Step 4: Turn off User Account Control
First copy sdp3 patch 2.31 folder from software CD to desktop
install-scania-sdp3-231-10
 
Right click the mouse->Personalize->Control Panel->User Accounts and Family Safety-> User Accounts->Change User Account settings
install-scania-sdp3-231-11

Select Never notify and press OK
Open sdp3 patch 2.31 folder on desktop
install-scania-sdp3-231-12

Run tmode as Administrator
Restart computer to turn off User Account Control
 
Step 5: Install SDP3 driver
Open patch folder
Open drivers folder
install-scania-sdp3-231-13
 
install-scania-sdp3-231-14

Run install_divers as Administrator
install-scania-sdp3-231-15

Run install as Administrator
install-scania-sdp3-231-16

Select Install this driver software
install-scania-sdp3-231-17

Driver installed successfully.
 
Step 6: Run SDP3 & Change Language 
Open patch folder->FIX SDP3 2.31 folder
copy these 2 files SCOMM_SSK.dat and SCOMM_SSK_HL.dll and replace them on C:/Program Files (x86)/Scania/SDP3
install-scania-sdp3-231-18
 
install-scania-sdp3-231-19
 
Open SDP3 software on desktop
Accept warning and Adobe Reader licences agreement
install-scania-sdp3-231-20

Select Connection tab-> Connect to wireless VCI
Exit SDP3
Open SDP3 Configurator
install-scania-sdp3-231-21

Select language
Then run Scania SDP3 software again, language is set to you desired.

How to set up Nexiq Clone to work with John Deere SA

Publié le 27/12/2017 à 12:06, Aéroport de Paris - Roissy Charles-de-Gaulle
Mots clefs : NexiqNexiq USB LinkJohn Deere SAJohn Deere Service Advisor

Hi, I have two scanner, John Deere EDL v2 and Nexiq usb link. EDL connection with service advisor is perfect. But with usb link, it doesn’t work. The only way where i have connection with usb link is in GetEcuId.

 

But finally I got Nexiq usb link to work with Service Advisor software

Here is how to operate…

 

First, you must reflash your Nexiq with John Deere EDL firmware. When you do that, you\ll got EDL as connected device in device manager.

 

Find original firmware and save it (backup)
C:\NEXIQ\RP1210A\usblink.bin
In John Deere Service Advisor find EDL.bin
I do not remember where it location …
Copy and rename EDL.bin to usblink.bin
replace original C:\NEXIQ\RP1210A\usblink.bin
Go to C:\NEXIQ\Test
open binload.exe
check checkbox – Enable automatic USB-Link firmware update
open CommCheck.exe
firmware will be update
and Nexiq name will be changed – now EDL-Link

 

Please take a note, that firmware reflash is possible only with original nexiq or HQ nexiq clone, LQ clones can’t be reflashed, even with newer nexiq firmware

It depends on what clone you have, my clone get all updates,works with OBD volvo,and have no issue.

 

Second, you must modify standard Nexiq 9 pin deutsch cable. just simply revert positions of CAN lines. There is two pairs of CAN lines. Here is instruction and picture how to do that here

 

Standard Nexiq 9 pin Deutsch cable

nexiq-9pin-cable

nexiq-9pin

Nexiq 9 pin Deutsch cable pinout

nexiq-9pin-adapter

Regards!

http://blog.obdii365.com/2017/12/27/use-nexiq-with-john-deere-service-advisor/



Page précédente | Page 3 sur 22 | Page suivante

Mes albums

Où suis-je actuellement ?



Rubriques

Mes amis

Sites favoris